SKF 6310NR Open Ball Bearing With Snap Ring 50mm x 110mm x 27mm

SKF 6310NR Open Ball Bearing With Snap Ring 50mm x 110mm x 27mm

Quantity Discounts: Applied at checkout

5+: £54.65      10+: £51.61      25+: £48.58      50+: £45.54

Our Price:  £60.72(Exc. 20% VAT)(£72.86 Inc. VAT)

Weight:  1.10 kg



Available for prompt despatch.

Ashley Part Number:  6310NR-SKF
Brand:  SKF
Inside Diameter (d):  50mm
Outside Diameter (D):  110mm
Width (B):  27mm

SKF Deep Groove Ball Bearing 6310NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

d: 50mm   D4: 116.6mm
D: 110mm   b: 2.7mm
B: 27mm   f: 2.46mm
Dynamic Load: 65 kN   C: 3.28mm
Static Load: 38 kN   r1,2 min: 2mm
Fatigue Load Limit: 1.6 kN   ro max: 0.6mm
Reference Speed: 13000 rpm   da min: 61mm
Limiting Speed: 8500 rpm   Da max: 99mm
Snap Ring: SP 110   Db min: 118mm
d1: 68.7mm   ba min: 3mm
D2: 95.2mm   Ca max: 5.74mm
D3: 106.81mm   ra max: 2mm


Be the first to Write a Review for this item!