Image displayed shows the product type but may not be the exact item

SKF 6212NR Open Ball Bearing With Snap Ring 60mm x 110mm x 22mm

Quantity Discounts: Applied at checkout

5+: £52.36      10+: £49.45      25+: £46.54      50+: £43.64

(Exc. 20% VAT)
(£69.82 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
780 g

SKF Deep Groove Ball Bearing 6212NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 60mm   D4: 116.6mm
D: 110mm   b: 2.7mm
B: 22mm   f: 2.46mm
Dynamic Load: 55.3 kN   C: 3.28mm
Static Load: 36 kN   r1,2 min: 1.5mm
Fatigue Load Limit: 1.53 kN   ro max: 0.6mm
Reference Speed: 13000 rpm   da min: 69mm
Limiting Speed: 8000 rpm   Da max: 101mm
Snap Ring: SP 110   Db min: 118mm
d1: 75.5mm   ba min: 3mm
D2: 98mm   Ca max: 5.74mm
D3: 106.81mm   ra max: 1.5mm


Customer Reviews (0)

Be the first to Write a Review for this item!