Image displayed shows the product type but may not be the exact item

SKF 6211NR Open Ball Bearing With Snap Ring 55mm x 100mm x 21mm

Quantity Discounts: Applied at checkout

5+: £43.28      10+: £40.88      25+: £38.47      50+: £36.07

(Exc. 20% VAT)
(£57.71 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
610 g

SKF Deep Groove Ball Bearing 6211NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 55mm   D4: 106.5mm
D: 100mm   b: 2.7mm
B: 21mm   f: 2.46mm
Dynamic Load: 46.2 kN   C: 3.28mm
Static Load: 29 kN   r1,2 min: 1.5mm
Fatigue Load Limit: 1.25 kN   ro max: 0.6mm
Reference Speed: 14000 rpm   da min: 64mm
Limiting Speed: 9000 rpm   Da max: 91mm
Snap Ring: SP 100   Db min: 108mm
d1: 69mm   ba min: 3mm
D2: 89.4mm   Ca max: 5.74mm
D3: 96.8mm   ra max: 1.5mm


Customer Reviews (0)

Be the first to Write a Review for this item!

Others Also Bought