Image displayed shows the product type but may not be the exact item

SKF 6011NR Open Ball Bearing With Snap Ring 55mm x 90mm x 18mm

Quantity Discounts: Applied at checkout

5+: £39.29      10+: £37.10      25+: £34.92      50+: £32.74

£43.65
(Exc. 20% VAT)
(£52.38 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number
6011NR-SKF
Brand
SKF
Inside Diameter (d):
55mm
Outside Diameter (D):
90mm
Width (B):
18mm
Weight
390 g
SKF
Description

SKF Deep Groove Ball Bearing 6011NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 55mm   D4: 96.5mm
D: 90mm   b: 2.7mm
B: 18mm   f: 2.46mm
Dynamic Load: 29.6 kN   C: 2.87mm
Static Load: 21.2 kN   r1,2 min: 1.1mm
Fatigue Load Limit: 0.9 kN   ro max: 0.6mm
Reference Speed: 16000 rpm   da min: 61mm
Limiting Speed: 10000 rpm   Da max: 84mm
Snap Ring: SP 90   Db min: 98mm
d1: 66.3mm   ba min: 3mm
D2: 81.5mm   Ca max: 5.33mm
D3: 86.79mm   ra max: 1mm

 

Customer Reviews (0)

Be the first to Write a Review for this item!