Image displayed shows the product type but may not be the exact item

SKF 6205NR Open Ball Bearing With Snap Ring 25mm x 52mm x 15mm

Quantity Discounts: Applied at checkout

5+: £12.72      10+: £12.01      25+: £11.30      50+: £10.60

(Exc. 20% VAT)
(£16.96 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
140 g

SKF Deep Groove Ball Bearing 6205NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 25mm   D4: 57.9mm
D: 52mm   b: 1.35mm
B: 15mm   f: 1.12mm
Dynamic Load: 14.8 kN   C: 2.46mm
Static Load: 7.8 kN   r1,2 min: 1mm
Fatigue Load Limit: 0.335 kN   ro max: 0.4mm
Reference Speed: 28000 rpm   da min: 30.6mm
Limiting Speed: 18000 rpm   Da max: 46.4mm
Snap Ring: SP 52   Db min: 59mm
d1: 34.3mm   ba min: 1.5mm
D2: 46.3mm   Ca max: 3.58mm
D3: 49.73mm   ra max: 1mm


Customer Reviews (0)

Be the first to Write a Review for this item!