Image displayed shows the product type but may not be the exact item

SKF 6008NR Open Ball Bearing With Snap Ring 40mm x 68mm x 15mm

Quantity Discounts: Applied at checkout

5+: £20.23      10+: £19.11      25+: £17.98      50+: £16.86

(Exc. 20% VAT)
(£26.98 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
200 g

SKF Deep Groove Ball Bearing 6008NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 40mm   D4: 74.6mm
D: 68mm   b: 1.9mm
B: 15mm   f: 1.7mm
Dynamic Load: 17.8 kN   C: 2.49mm
Static Load: 11 kN   r1,2 min: 1mm
Fatigue Load Limit: 0.49 kN   ro max: 0.6mm
Reference Speed: 22000 rpm   da min: 44.6mm
Limiting Speed: 14000 rpm   Da max: 63.4mm
Snap Ring: SP 68   Db min: 76mm
d1: 49.2mm   ba min: 2.2mm
D2: 61.1mm   Ca max: 4.19mm
D3: 64.82mm   ra max: 1mm


Customer Reviews (0)

Be the first to Write a Review for this item!