Image displayed shows the product type but may not be the exact item

SKF 6015NR Open Ball Bearing With Snap Ring 75mm x 115mm x 20mm

Quantity Discounts: Applied at checkout

5+: £80.22      10+: £75.76      25+: £71.30      50+: £66.85

(Exc. 20% VAT)
(£106.96 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
650 g

SKF Deep Groove Ball Bearing 6015NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 75mm   D4: 121.6mm
D: 115mm   b: 2.7mm
B: 20mm   f: 2.46mm
Dynamic Load: 41.6 kN   C: 2.87mm
Static Load: 33.5 kN   r1,2 min: 1.1mm
Fatigue Load Limit: 1.43 kN   ro max: 0.6mm
Reference Speed: 12000 rpm   da min: 81mm
Limiting Speed: 7500 rpm   Da max: 109mm
Snap Ring: SP 115   Db min: 123mm
d1: 87.8mm   ba min: 3mm
D2: 105mm   Ca max: 5.33mm
D3: 111.81mm   ra max: 1mm


Customer Reviews (0)

Be the first to Write a Review for this item!