Image displayed shows the product type but may not be the exact item

SKF 6315NR Open Ball Bearing With Snap Ring 75mm x 160mm x 37mm

Quantity Discounts: Applied at checkout

5+: £0.00      10+: £0.00      25+: £0.00      50+: £0.00

(Exc. 20% VAT)
(£0.00 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
3.10 kg

SKF Deep Groove Ball Bearing 6315NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 75mm   D4: 169.7mm
D: 160mm   b: 3.1mm
B: 37mm   f: 2.82mm
Dynamic Load: 119 kN   C: 4.9mm
Static Load: 76.5 kN   r1,2 min: 2.1mm
Fatigue Load Limit: 3 kN   ro max: 0.6mm
Reference Speed: 9000 rpm   da min: 87mm
Limiting Speed: 5600 rpm   Da max: 148mm
Snap Ring: SP 160   Db min: 172mm
d1: 101mm   ba min: 3.5mm
D2: 139mm   Ca max: 7.72mm
D3: 155.22mm   ra max: 2mm


Customer Reviews (0)

Be the first to Write a Review for this item!