Image displayed shows the product type but may not be the exact item

SKF 6013NR Open Ball Bearing With Snap Ring 65mm x 100mm x 18mm

Quantity Discounts: Applied at checkout

5+: £51.05      10+: £48.21      25+: £45.38      50+: £42.54

£56.72
(Exc. 20% VAT)
(£68.06 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number
6013NR-SKF
Brand
SKF
Inside Diameter (d):
65mm
Outside Diameter (D):
100mm
Width (B):
18mm
Weight
450 g
SKF
Description

SKF Deep Groove Ball Bearing 6013NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 65mm   D4: 106.5mm
D: 100mm   b: 2.7mm
B: 18mm   f: 2.46mm
Dynamic Load: 31.9 kN   C: 2.87mm
Static Load: 25 kN   r1,2 min: 1.1mm
Fatigue Load Limit: 1.06 kN   ro max: 0.6mm
Reference Speed: 14000 rpm   da min: 71mm
Limiting Speed: 9000 rpm   Da max: 94mm
Snap Ring: SP 100   Db min: 108mm
d1: 76.3mm   ba min: 3mm
D2: 91.5mm   Ca max: 5.33mm
D3: 96.8mm   ra max: 1mm

 

Customer Reviews (0)

Be the first to Write a Review for this item!