SKF 6410NR Open Ball Bearing With Snap Ring 50mm x 130mm x 31mm

SKF 6410NR Open Ball Bearing With Snap Ring 50mm x 130mm x 31mm

Quantity Discounts: Applied at checkout

5+: £155.75      10+: £147.09      25+: £138.44      50+: £129.79

Our Price:  £173.05(Exc. 20% VAT)(£207.66 Inc. VAT)

Weight:  2 kg



Available for prompt despatch.

Ashley Part Number:  6410NR
Brand:  SKF
Inside Diameter (d):  50mm
Outside Diameter (D):  130mm
Width (B):  31mm

SKF Deep Groove Ball Bearing 6410NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

d: 50mm   D4: 139.7mm
D: 130mm   b: 3.1mm
B: 31mm   f: 2.82mm
Dynamic Load: 87.1 kN   C: 4.06mm
Static Load: 52 kN   r1,2 min: 2.1mm
Fatigue Load Limit: 2.2 kN   ro max: 0.6mm
Reference Speed: 12000 rpm   da min: 64mm
Limiting Speed: 7500 rpm   Da max: 116mm
Snap Ring: SP 130   Db min: 141mm
d1: 75.4mm   ba min: 3.5mm
D2: 105mm   Ca max: 6.88mm
D3: 125.22mm   ra max: 2mm


Be the first to Write a Review for this item!