Image displayed shows the product type but may not be the exact item

SKF 6409NR Open Ball Bearing With Snap Ring 45mm x 120mm x 29mm

Quantity Discounts: Applied at checkout

5+: £122.41      10+: £115.61      25+: £108.81      50+: £102.01

(Exc. 20% VAT)
(£163.21 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
1.60 kg

SKF Deep Groove Ball Bearing 6409NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 45mm   D4: 129.7mm
D: 120mm   b: 3.1mm
B: 29mm   f: 2.82mm
Dynamic Load: 76.1 kN   C: 4.06mm
Static Load: 45 kN   r1,2 min: 2mm
Fatigue Load Limit: 1.9 kN   ro max: 0.6mm
Reference Speed: 13000 rpm   da min: 58mm
Limiting Speed: 8500 rpm   Da max: 107mm
Snap Ring: SP 120   Db min: 131mm
d1: 68.9mm   ba min: 3.5mm
D2: 95.9mm   Ca max: 6.88mm
D3: 115.21mm   ra max: 2mm


Customer Reviews (0)

Be the first to Write a Review for this item!