Image displayed shows the product type but may not be the exact item

SKF 6320-2RS1 Sealed Ball Bearing 100mm x 215mm x 47mm

Quantity Discounts: Applied at checkout

5+: £458.72      10+: £433.24      25+: £407.75      50+: £382.27

(Exc. 20% VAT)
(£611.63 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
7.08 kg

SKF Deep Groove Ball Bearing 6320-2RS1 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 100mm
D: 215mm
B: 47mm
Dynamic Load: 174 kN
Static Load: 140 kN
Fatigue Load Limit: 4.75 kN
Reference Speed: 6700 rpm
Limiting Speed: 2000 rpm
d1: 135mm
D2: 184mm
r1,2 min: 3mm
da min: 114mm
Da max: 201mm
ra max: 2.5mm




Customer Reviews (0)

Be the first to Write a Review for this item!