SKF 6319-2RS1/C3 Sealed Ball Bearing 95mm x 200mm x 45mm

SKF 6319-2RS1/C3 Sealed Ball Bearing 95mm x 200mm x 45mm

Quantity Discounts: Applied at checkout

5+: £314.20      10+: £296.74      25+: £279.29      50+: £261.83

Our Price:  £349.11(Exc. 20% VAT)(£418.93 Inc. VAT)

Weight:  5.75 kg



Available for prompt despatch.

Ashley Part Number:  63192RSC3-SKF
Brand:  SKF
Inside Diameter (d):  95mm
Outside Diameter (D):  200mm
Width (B):  45mm
Clearance:  C3

SKF Deep Groove Ball Bearing 6319-2RS1/C3 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 95mm
D: 200mm
B: 45mm
Dynamic Load: 159 kN
Static Load: 118 kN
Fatigue Load Limit: 4.15 kN
Reference Speed: 7000 rpm
Limiting Speed: 2200 rpm
d1: 127mm
D2: 172mm
r1,2 min: 3mm
da min: 109mm
Da max: 186mm
ra max: 2.5mm




Be the first to Write a Review for this item!