Image displayed shows the product type but may not be the exact item

SKF 6318-2RS1/C3 Sealed Ball Bearing 90mm x 190mm x 43mm

Quantity Discounts: Applied at checkout

5+: £191.69      10+: £181.04      25+: £170.39      50+: £159.74

(Exc. 20% VAT)
(£255.59 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
4.97 kg

SKF Deep Groove Ball Bearing 6318-2RS1/C3 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 90mm
D: 190mm
B: 43mm
Dynamic Load: 151 kN
Static Load: 108 kN
Fatigue Load Limit: 3.8 kN
Reference Speed: 7500 rpm
Limiting Speed: 2400 rpm
d1: 121mm
D2: 164mm
r1,2 min: 3mm
da min: 104mm
Da max: 176mm
ra max: 2.5mm




Customer Reviews (0)

Be the first to Write a Review for this item!