Image displayed shows the product type but may not be the exact item

SKF 6317-2Z/C3 Shielded Ball Bearing 85mm x 180mm x 41mm

Quantity Discounts: Applied at checkout

5+: £139.64      10+: £131.89      25+: £124.13      50+: £116.37

(Exc. 20% VAT)
(£186.19 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
4.25 kg

SKF Deep Groove Ball Bearing 6317-2Z/C3 Metal Shielded

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.


Technical Information
d: 85mm
D: 180mm
B: 41mm
Dynamic Load: 140 kN
Static Load: 96.5 kN
Fatigue Load Limit: 3.55 kN
Reference Speed: 8000 rpm
Limiting Speed: 4000 rpm
d1: 115mm
D2: 155mm
r1,2 min: 3mm
da min: 99mm
Da max: 166mm
ra max: 2.5mm




Customer Reviews (0)

Be the first to Write a Review for this item!