SKF 6315-2RS1/C3 Sealed Ball Bearing 75mm x 160mm x 37mm

SKF 6315-2RS1/C3 Sealed Ball Bearing 75mm x 160mm x 37mm

Quantity Discounts: Applied at checkout

5+: £139.35      10+: £131.61      25+: £123.86      50+: £116.12

Our Price:  £154.83(Exc. 20% VAT)(£185.80 Inc. VAT)

Weight:  3.06 kg



Available for prompt despatch.

Ashley Part Number:  63152RSC3-SKF
Brand:  SKF
Inside Diameter (d):  75mm
Outside Diameter (D):  160mm
Width (B):  37mm
Clearance:  C3

SKF Deep Groove Ball Bearing 6315-2RS1/C3 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 75mm
D: 160mm
B: 37mm
Dynamic Load: 119 kN
Static Load: 76.5 kN
Fatigue Load Limit: 3 kN
Reference Speed: 9000 rpm
Limiting Speed: 2800 rpm
d1: 101mm
D2: 138mm
r1,2 min: 2.1mm
da min: 87mm
Da max: 148mm
ra max: 2mm




Be the first to Write a Review for this item!