SKF 6313-2RS1 Sealed Ball Bearing 65mm x 140mm x 33mm

SKF 6313-2RS1 Sealed Ball Bearing 65mm x 140mm x 33mm

Quantity Discounts: Applied at checkout

5+: £65.44      10+: £61.80      25+: £58.17      50+: £54.53

Our Price:  £72.71(Exc. 20% VAT)(£87.25 Inc. VAT)

Weight:  2.12 kg



Available for prompt despatch.

Ashley Part Number:  63132RS-SKF
Brand:  SKF
Inside Diameter (d):  65mm
Outside Diameter (D):  140mm
Width (B):  33mm

SKF Deep Groove Ball Bearing 6313-2RS1 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 65mm
D: 140mm
B: 33mm
Dynamic Load: 97.5 kN
Static Load: 60 kN
Fatigue Load Limit: 2.5 kN
Reference Speed: 10000 rpm
Limiting Speed: 3200 rpm
d1: 88.4mm
D2: 121mm
r1,2 min: 2.1mm
da min: 77mm
Da max: 128mm
ra max: 2mm




Be the first to Write a Review for this item!