Image displayed shows the product type but may not be the exact item

SKF 6311-2Z/C3 Shielded Ball Bearing 55mm x 120mm x 29mm

Quantity Discounts: Applied at checkout

5+: £42.20      10+: £39.86      25+: £37.51      50+: £35.17

(Exc. 20% VAT)
(£56.27 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
1.37 kg

SKF Deep Groove Ball Bearing 6311-2Z/C3 Metal Shielded

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.


Technical Information
d: 55mm
D: 120mm
B: 29mm
Dynamic Load: 74.1 kN
Static Load: 45 kN
Fatigue Load Limit: 1.9 kN
Reference Speed: 12000 rpm
Limiting Speed: 6300 rpm
d1: 75.3mm
D2: 104mm
r1,2 min: 2mm
da min: 66mm
Da max: 109mm
ra max: 2mm




Customer Reviews (0)

Be the first to Write a Review for this item!