SKF 6309-2Z/C3 Shielded Ball Bearing 45mm x 100mm x 25mm

SKF 6309-2Z/C3 Shielded Ball Bearing 45mm x 100mm x 25mm

Our Price:  £32.85(Exc. 20% VAT)(£39.42 Inc. VAT)

Weight:  840 g



Available for prompt despatch.

Ashley Part Number:  6309ZZC3
Brand:  SKF
Inside Diameter (d):  45mm
Outside Diameter (D):  100mm
Width (B):  25mm
Clearance:  C3

SKF Deep Groove Ball Bearing 6309-2Z/C3 Metal Shielded

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.


d: 45mm
D: 100mm
B: 25mm
Dynamic Load: 55.3 kN
Static Load: 31.5 kN
Fatigue Load Limit: 1.34 kN
Reference Speed: 15000 rpm
Limiting Speed: 7500 rpm
d1: 62.2mm
D2: 86.7mm
r1,2 min: 1.5mm
da min: 54mm
Da max: 91mm
ra max: 1.5mm




Be the first to Write a Review for this item!