SKF 6307-2RS1 Sealed Ball Bearing 35mm x 80mm x 21mm

SKF 6307-2RS1 Sealed Ball Bearing 35mm x 80mm x 21mm

Quantity Discounts: Applied at checkout

5+: £14.49      10+: £13.69      25+: £12.88      50+: £12.08

Our Price:  £16.10(Exc. 20% VAT)(£19.32 Inc. VAT)

Weight:  460 g



Available for prompt despatch.

Ashley Part Number:  63072RS-SKF
Brand:  SKF
Inside Diameter (d):  35mm
Outside Diameter (D):  80mm
Width (B):  21mm

SKF Deep Groove Ball Bearing 6307-2RS1 Rubber Sealed

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 35mm
D: 80mm
B: 21mm
Dynamic Load: 35.1 kN
Static Load: 19 kN
Fatigue Load Limit: 0.82 kN
Reference Speed: 19000 rpm
Limiting Speed: 6000 rpm
d1: 49.6mm
D2: 69.2mm
r1,2 min: 1.5mm
da min: 44mm
Da max: 71mm
ra max: 1.5mm




Be the first to Write a Review for this item!