SKF 6306-2Z Shielded Ball Bearing 30mm x 72mm x 19mm

SKF 6306-2Z Shielded Ball Bearing 30mm x 72mm x 19mm

Our Price:  £13.45(Exc. 20% VAT)(£16.14 Inc. VAT)
Qty:

Weight:  350 g

Availability:  

  

Available for prompt despatch.

Ashley Part Number:  6306ZZ
Brand:  SKF
Inside Diameter (d):  30mm
Outside Diameter (D):  72mm
Width (B):  19mm

SKF Deep Groove Ball Bearing 6306-2Z Metal Shielded

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 30mm
D: 72mm
B: 19mm
Dynamic Load: 29.6 kN
Static Load: 16 kN
Fatigue Load Limit: 0.67 kN
Reference Speed: 20000 rpm
Limiting Speed: 11000 rpm
d1: 44.6mm
D2: 61.9mm
r1,2 min: 1.1mm
da min: 37mm
Da max: 65mm
ra max: 1mm

 

 

 

Be the first to Write a Review for this item!