Image displayed shows the product type but may not be the exact item

SKF 6305NR Open Ball Bearing With Snap Ring 25mm x 62mm x 17mm

Quantity Discounts: Applied at checkout

5+: £16.88      10+: £15.94      25+: £15.00      50+: £14.06

(Exc. 20% VAT)
(£22.50 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
230 g

SKF Deep Groove Ball Bearing 6305NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 25mm   D4: 67.7mm
D: 62mm   b: 1.9mm
B: 7mm   f: 1.7mm
Dynamic Load: 23.4 kN   C: 3.28mm
Static Load: 11.6 kN   r1,2 min: 1.1mm
Fatigue Load Limit: 0.49 kN   ro max: 0.6mm
Reference Speed: 24000 rpm   da min: 32mm
Limiting Speed: 16000 rpm   Da max: 55mm
Snap Ring: SP 62   Db min: 69mm
d1: 36.6mm   ba min: 2.2mm
D2: 52.7mm   Ca max: 4.98mm
D3: 59.61mm   ra max: 1mm


Customer Reviews (0)

Be the first to Write a Review for this item!