SKF 6303-2RSH/C3 Sealed Ball Bearing 17mm x 47mm x 14mm

SKF 6303-2RSH/C3 Sealed Ball Bearing 17mm x 47mm x 14mm

Quantity Discounts: Applied at checkout

5+: £5.51      10+: £5.20      25+: £4.90      50+: £4.59

Our Price:  £6.12(Exc. 20% VAT)(£7.34 Inc. VAT)

Weight:  120 g



Available for prompt despatch.

Ashley Part Number:  63032RSC3-SKF
Brand:  SKF
Inside Diameter (d):  17mm
Outside Diameter (D):  47mm
Width (B):  14mm
Clearance:  C3

SKF Deep Groove Ball Bearing 6303-2RSH/C3 Rubber Sealed

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 17mm
D: 47mm
B: 14mm
Dynamic Load: 14.3 kN
Static Load: 6.55 kN
Fatigue Load Limit: 0.275 kN
Reference Speed: 34000 rpm
Limiting Speed: 11000 rpm
d2: 24mm
D2: 39.7mm
r1,2 min: 1mm
da min: 22.6mm
Da max: 41.4mm
ra max: 1mm




Be the first to Write a Review for this item!