SKF 62306-2RS1 Sealed Ball Bearing 30mm x 72mm x 27mm

SKF 62306-2RS1 Sealed Ball Bearing 30mm x 72mm x 27mm

Quantity Discounts: Applied at checkout

5+: £31.45      10+: £29.70      25+: £27.95      50+: £26.21

Our Price:  £34.94(Exc. 20% VAT)(£41.93 Inc. VAT)

Weight:  500 g



Available for prompt despatch.

Ashley Part Number:  623062RS-SKF
Brand:  SKF
Inside Diameter (d):  30mm
Outside Diameter (D):  72mm
Width (B):  27mm

SKF Deep Groove Ball Bearing 62306-2RS1 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 30mm
D: 72mm
B: 27mm
Dynamic Load: 28.1 kN
Static Load: 16 kN
Fatigue Load Limit: 0.67 kN
Reference Speed: 20000 rpm
Limiting Speed: 6300 rpm
d1: 44.6mm
D2: 61.9mm
r1,2 min: 1.1mm
da min: 37mm
Da max: 65mm
ra max: 1mm




Be the first to Write a Review for this item!