Image displayed shows the product type but may not be the exact item

SKF 6218-2Z/C3 Shielded Ball Bearing 90mm x 160mm x 30mm

Quantity Discounts: Applied at checkout

5+: £131.47      10+: £124.17      25+: £116.86      50+: £109.56

(Exc. 20% VAT)
(£175.30 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
2.31 kg

SKF Deep Groove Ball Bearing 6218-2Z/C3 Metal Shielded

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.


Technical Information
d: 90mm
D: 160mm
B: 30mm
Dynamic Load: 101 kN
Static Load: 73.5 kN
Fatigue Load Limit: 2.8 kN
Reference Speed: 8500 rpm
Limiting Speed: 4300 rpm
d1: 113mm
D2: 143mm
r1,2 min: 2mm
da min: 101mm
Da max: 149mm
ra max: 2mm




Customer Reviews (0)

Be the first to Write a Review for this item!