SKF 6218-2RS1 Sealed Ball Bearing 90mm x 160mm x 30mm

SKF 6218-2RS1 Sealed Ball Bearing 90mm x 160mm x 30mm

Our Price:  £163.76(Exc. 20% VAT)(£196.51 Inc. VAT)
Qty:

Weight:  2.31 kg

Availability:  

  

Available for prompt despatch.

Ashley Part Number:  62182RS
Brand:  SKF
Inside Diameter (d):  90mm
Outside Diameter (D):  160mm
Width (B):  30mm

SKF Deep Groove Ball Bearing 6218-2RS1 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 90mm
D: 160mm
B: 30mm
Dynamic Load: 101 kN
Static Load: 73.5 kN
Fatigue Load Limit: 2.8 kN
Reference Speed: 8500 rpm
Limiting Speed: 2600 rpm
d2: 106mm
D2: 143mm
r1,2 min: 2mm
da min: 101mm
Da max: 149mm
ra max: 2mm

 

 

 

Be the first to Write a Review for this item!