SKF 6217-2Z/C3 Shielded Ball Bearing 85mm x 150mm x 28mm

SKF 6217-2Z/C3 Shielded Ball Bearing 85mm x 150mm x 28mm

Our Price:  £117.69(Exc. 20% VAT)(£141.23 Inc. VAT)

Weight:  1.80 kg



Available for prompt despatch.

Ashley Part Number:  6217ZZC3
Brand:  SKF
Inside Diameter (d):  85mm
Outside Diameter (D):  150mm
Width (B):  28mm
Clearance:  C3

SKF Deep Groove Ball Bearing 6217-2Z/C3 Metal Shielded

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.


d: 85mm
D: 150mm
B: 28mm
Dynamic Load: 87.1 kN
Static Load: 64 kN
Fatigue Load Limit: 2.5 kN
Reference Speed: 9000 rpm
Limiting Speed: 4500 rpm
d1: 106mm
D2: 134mm
r1,2 min: 2mm
da min: 96mm
Da max: 139mm
ra max: 2mm




Be the first to Write a Review for this item!