Image displayed shows the product type but may not be the exact item

SKF 6216-2RS1/C3 Sealed Ball Bearing 80mm x 140mm x 26mm

Quantity Discounts: Applied at checkout

5+: £63.23      10+: £59.72      25+: £56.21      50+: £52.70

(Exc. 20% VAT)
(£84.31 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
1.40 kg

SKF Deep Groove Ball Bearing 6216-2RS1/C3 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 80mm
D: 140mm
B: 26mm
Dynamic Load: 72.8 kN
Static Load: 55 kN
Fatigue Load Limit: 2.2 kN
Reference Speed: 9500 rpm
Limiting Speed: 3000 rpm
d1: 101mm
D2: 127mm
r1,2 min: 2mm
da min: 91mm
Da max: 129mm
ra max: 2mm




Customer Reviews (0)

Be the first to Write a Review for this item!