SKF 6214-2RS1/C3 Sealed Ball Bearing 70mm x 125mm x 24mm

SKF 6214-2RS1/C3 Sealed Ball Bearing 70mm x 125mm x 24mm

Quantity Discounts: Applied at checkout

5+: £40.11      10+: £37.88      25+: £35.66      50+: £33.43

Our Price:  £44.57(Exc. 20% VAT)(£53.48 Inc. VAT)

Weight:  1.06 kg



Available for prompt despatch.

Ashley Part Number:  62142RSC3-SKF
Brand:  SKF
Inside Diameter (d):  70mm
Outside Diameter (D):  125mm
Width (B):  24mm
Clearance:  C3

SKF Deep Groove Ball Bearing 6214-2RS1/C3 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 70mm
D: 125mm
B: 24mm
Dynamic Load: 63.7 kN
Static Load: 45 kN
Fatigue Load Limit: 1.9 kN
Reference Speed: 11000 rpm
Limiting Speed: 3400 rpm
d1: 87.1mm
D2: 111mm
r1,2 min: 1.5mm
da min: 79mm
Da max: 116mm
ra max: 1.5mm




Be the first to Write a Review for this item!