Image displayed shows the product type but may not be the exact item

SKF 6213-2RS1/C3 Sealed Ball Bearing 65mm x 120mm x 23mm

Quantity Discounts: Applied at checkout

5+: £41.21      10+: £38.92      25+: £36.63      50+: £34.34

£45.79
(Exc. 20% VAT)
(£54.95 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number
62132RSC3-SKF
Brand
SKF
Inside Diameter (d):
65mm
Outside Diameter (D):
120mm
Width (B):
23mm
Clearance:
C3
Weight
990 g
SKF
Description

SKF Deep Groove Ball Bearing 6213-2RS1/C3 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 65mm
D: 120mm
B: 23mm
Dynamic Load: 58.5 kN
Static Load: 40.5 kN
Fatigue Load Limit: 1.73 kN
Reference Speed: 12000 rpm
Limiting Speed: 3600 rpm
d1: 83.3mm
D2: 106mm
r1,2 min: 1.5mm
da min: 74mm
Da max: 111mm
ra max: 1.5mm

 

 

 

Customer Reviews (0)

Be the first to Write a Review for this item!