Image displayed shows the product type but may not be the exact item

SKF 6208-2RS1/C3 Sealed Ball Bearing 40mm x 80mm x 18mm

Quantity Discounts: Applied at checkout

5+: £14.84      10+: £14.02      25+: £13.19      50+: £12.37

(Exc. 20% VAT)
(£19.79 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
370 g

SKF Deep Groove Ball Bearing 6208-2RS1/C3 Rubber Sealed

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 40mm
D: 80mm
B: 18mm
Dynamic Load: 32.5 kN
Static Load: 19 kN
Fatigue Load Limit: 0.8 kN
Reference Speed: 18000 rpm
Limiting Speed: 5600 rpm
d1: 52.6mm
D2: 69.8mm
r1,2 min: 1.1mm
da min: 47mm
Da max: 73mm
ra max: 1mm




Customer Reviews (0)

Be the first to Write a Review for this item!