Image displayed shows the product type but may not be the exact item

SKF 6202-2ZNR Shielded Ball Bearing With Snap Ring 15mm x 35mm x 11mm

Quantity Discounts: Applied at checkout

5+: £7.97      10+: £7.53      25+: £7.09      50+: £6.65

(Exc. 20% VAT)
(£10.63 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
50 g

SKF Deep Groove Ball Bearing 6202-2ZNR Metal Shielded C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 15mm   D4: 39.7mm
D: 35mm   b: 1.35mm
B: 11mm   f: 1.12mm
Dynamic Load: 8.06 kN   C: 2.06mm
Static Load: 3.75 kN   r1,2 min: 0.6mm
Fatigue Load Limit: 0.16 kN   ro max: 0.4mm
Reference Speed: 43000 rpm   da min: 19.2mm
Limiting Speed: 22000 rpm   Da max: 30.8mm
Snap Ring: SP 35   Db min: 41mm
d1: 21.7mm   ba min: 1.5mm
D2: 30.4mm   Ca max: 3.18mm
D3: 33.17mm   ra max: 0.6mm


Customer Reviews (0)

Be the first to Write a Review for this item!