SKF 6202-2RSH Sealed Ball Bearing 15mm x 35mm x 11mm

SKF 6202-2RSH Sealed Ball Bearing 15mm x 35mm x 11mm

Quantity Discounts: Applied at checkout

5+: £3.72      10+: £3.51      25+: £3.30      50+: £3.10

Our Price:  £4.13(Exc. 20% VAT)(£4.96 Inc. VAT)

Weight:  40 g



Available for prompt despatch.

Ashley Part Number:  62022RS-SKF
Brand:  SKF
Inside Diameter (d):  15mm
Outside Diameter (D):  35mm
Width (B):  11mm

SKF Deep Groove Ball Bearing 6202-2RSH Rubber Sealed

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 15mm
D: 35mm
B: 11mm
Dynamic Load: 8.06 kN
Static Load: 3.75 kN
Fatigue Load Limit: 0.16 kN
Reference Speed: 43000 rpm
Limiting Speed: 13000 rpm
d1: 21.7mm
D2: 30.4mm
r1,2 min: 0.6mm
da min: 19.2mm
Da max: 30.8mm
ra max: 0.6mm




Be the first to Write a Review for this item!