SKF 61902-2Z Shielded Thin SectionBall Bearing 15mm x 28mm x 7mm

SKF 61902-2Z Shielded Thin SectionBall Bearing 15mm x 28mm x 7mm

Quantity Discounts: Applied at checkout

5+: £10.07      10+: £9.54      25+: £9.01      50+: £8.48

Our Price:  £10.60(Exc. 20% VAT)(£12.72 Inc. VAT)

Weight:  20 g



Available for prompt despatch.

Ashley Part Number:  61902ZZ-SKF
Brand:  SKF
Inside Diameter (d):  15mm
Outside Diameter (D):  28mm
Width (B):  7mm

SKF Thin Section Ball Bearing 61902-2Z Metal Shielded

Thin section ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable thin section ball bearings to accommodate axial loads in both directions.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offer the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 15mm
D: 28mm
B: 7mm
Dynamic Load: 4.36 kN
Static Load: 2.24 kN
Fatigue Load Limit: 0.095 kN
Reference Speed: 56000 rpm
Limiting Speed: 28000 rpm
d1: 18.4mm
D2: 25.8mm
r1,2 min: 0.3mm
da min: 17mm
Da max: 26mm
ra max: 0.3mm




Be the first to Write a Review for this item!