SKF 61810-2RS1 Sealed Thin Section Ball Bearing 50mm x 65mm x 7mm

SKF 61810-2RS1 Sealed Thin Section Ball Bearing 50mm x 65mm x 7mm

Quantity Discounts: Applied at checkout

5+: £35.94      10+: £34.05      25+: £32.16      50+: £30.26

Our Price:  £37.83(Exc. 20% VAT)(£45.40 Inc. VAT)

Weight:  60 g



Available for prompt despatch.

Ashley Part Number:  618102RS-SKF
Brand:  SKF
Inside Diameter (d):  50mm
Outside Diameter (D):  65mm
Width (B):  7mm

SKF Thin Section Ball Bearing 61810-2RS1 Rubber Sealed

Thin section ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable thin section ball bearings to accommodate axial loads in both directions.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offer the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 50mm
D: 65mm
B: 7mm
Dynamic Load: 6.76 kN
Static Load: 6.8 kN
Fatigue Load Limit: 0.285 kN
Reference Speed: 20000 rpm
Limiting Speed: 6000 rpm
D2: 61.8mm
r1,2 min: 0.3mm
da min: 52mm
Da max: 63mm
ra max: 0.3mm





Be the first to Write a Review for this item!