Image displayed shows the product type but may not be the exact item

SKF 61802-2Z Shielded Thin Section Ball Bearing 15mm x 24mm x 5mm

Quantity Discounts: Applied at checkout

5+: £10.92      10+: £10.34      25+: £9.77      50+: £9.19

(Exc. 20% VAT)
(£13.79 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
10 g

SKF Thin Section Ball Bearing 61802-2Z Metal Shielded

Thin section ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable thin section ball bearings to accommodate axial loads in both directions.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offer the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 15mm
D: 24mm
B: 5mm
Dynamic Load: 1.56 kN
Static Load: 0.8 kN
Fatigue Load Limit: 0.034 kN
Reference Speed: 60000 rpm
Limiting Speed: 30000 rpm
d1: 17.9mm
D2: 22.1mm
r1,2 min: 0.3mm
da min: 17mm
Da max: 22mm
ra max: 0.3mm




Customer Reviews (0)

Be the first to Write a Review for this item!