Image displayed shows the product type but may not be the exact item

SKF 6019-2Z/C3 Shielded Ball Bearing 95mm x 145mm x 24mm

Quantity Discounts: Applied at checkout

5+: £103.45      10+: £97.70      25+: £91.95      50+: £86.21

£114.94
(Exc. 20% VAT)
(£137.93 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number
6019ZZC3-SKF
Brand
SKF
Inside Diameter (d):
95mm
Outside Diameter (D):
145mm
Width (B):
24mm
Clearance:
C3
Weight
1.25 kg
SKF
Description

SKF Deep Groove Ball Bearing 6019-2Z/C3 Metal Shielded

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

 

Technical Information
d: 95mm
D: 145mm
B: 24mm
Dynamic Load: 63.7 kN
Static Load: 54 kN
Fatigue Load Limit: 2.08 kN
Reference Speed: 9500 rpm
Limiting Speed: 4800 rpm
d1: 111mm
D2: 133mm
r1,2 min: 1.5mm
da min: 102mm
Da max: 138mm
ra max: 1.5mm

 

 

 

Customer Reviews (0)

Be the first to Write a Review for this item!