Image displayed shows the product type but may not be the exact item

SKF 6018NR Open Ball Bearing With Snap Ring 90mm x 140mm x 24mm

Quantity Discounts: Applied at checkout

5+: £150.78      10+: £142.40      25+: £134.02      50+: £125.65

(Exc. 20% VAT)
(£201.04 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
1.20 kg

SKF Deep Groove Ball Bearing 6018NR Open C/W Snap Ring

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds. The snap ring groove simplifies arrangement design as the bearings can be axially located in the housing by the snap ring.

Technical Information
d: 90mm   D4: 149.7mm
D: 140mm   b: 3.1mm
B: 24mm   f: 2.82mm
Dynamic Load: 60.5 kN   C: 3.71mm
Static Load: 50 kN   r1,2 min: 1.5mm
Fatigue Load Limit: 1.96 kN   ro max: 0.6mm
Reference Speed: 10000 rpm   da min: 97mm
Limiting Speed: 6300 rpm   Da max: 133mm
Snap Ring: SP 140   Db min: 151mm
d1: 105mm   ba min: 3.5mm
D2: 129mm   Ca max: 6.53mm
D3: 135.23mm   ra max: 1.5mm


Customer Reviews (0)

Be the first to Write a Review for this item!