SKF 6018-2RS1 Sealed Ball Bearing 90mm x 140mm x 24mm

SKF 6018-2RS1 Sealed Ball Bearing 90mm x 140mm x 24mm

Our Price:  £74.48(Exc. 20% VAT)(£89.38 Inc. VAT)

Weight:  1.16 kg



Available for prompt despatch.

Ashley Part Number:  60182RS
Brand:  SKF
Inside Diameter (d):  90mm
Outside Diameter (D):  140mm
Width (B):  24mm

SKF Deep Groove Ball Bearing 6018-2RS1 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 90mm
D: 140mm
B: 24mm
Dynamic Load: 60.5 kN
Static Load: 50 kN
Fatigue Load Limit: 1.96 kN
Reference Speed: 10000 rpm
Limiting Speed: 2800 rpm
d1: 106mm
D2: 128mm
r1,2 min: 1.5mm
da min: 97mm
Da max: 133mm
ra max: 1.5mm




Be the first to Write a Review for this item!