SKF 6016-2RS1 Sealed Ball Bearing 80mm x 125mm x 22mm

SKF 6016-2RS1 Sealed Ball Bearing 80mm x 125mm x 22mm

Quantity Discounts: Applied at checkout

5+: £42.90      10+: £40.52      25+: £38.14      50+: £35.75

Our Price:  £47.67(Exc. 20% VAT)(£57.20 Inc. VAT)

Weight:  880 g



Available for prompt despatch.

Ashley Part Number:  60162RS-SKF
Brand:  SKF
Inside Diameter (d):  80mm
Outside Diameter (D):  125mm
Width (B):  22mm

SKF Deep Groove Ball Bearing 6016-2RS1 Rubber Sealed

Single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 80mm
D: 125mm
B: 22mm
Dynamic Load: 49.4 kN
Static Load: 40 kN
Fatigue Load Limit: 1.66 kN
Reference Speed: 11000 rpm
Limiting Speed: 3200 rpm
d1: 94.4mm
D2: 114mm
r1,2 min: 1.1mm
da min: 86mm
Da max: 119mm
ra max: 1mm




Be the first to Write a Review for this item!