SKF 6012-2RS1 Sealed Ball Bearing 60mm x 95mm x 18mm

SKF 6012-2RS1 Sealed Ball Bearing 60mm x 95mm x 18mm

Quantity Discounts: Applied at checkout

5+: £21.30      10+: £20.12      25+: £18.94      50+: £17.75

Our Price:  £23.67(Exc. 20% VAT)(£28.40 Inc. VAT)

Weight:  420 g



Available for prompt despatch.

Ashley Part Number:  60122RS-SKF
Brand:  SKF
Inside Diameter (d):  60mm
Outside Diameter (D):  95mm
Width (B):  18mm

SKF Deep Groove Ball Bearing 6012-2RS1 Rubber Sealed

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 60mm
D: 95mm
B: 18mm
Dynamic Load: 30.7 kN
Static Load: 23.2 kN
Fatigue Load Limit: 0.98 kN
Reference Speed: 15000 rpm
Limiting Speed: 4300 rpm
d1: 71.3mm
D2: 86.5mm
r1,2 min: 1.1mm
da min: 66mm
Da max: 89mm
ra max: 1mm




Be the first to Write a Review for this item!