SKF 6010-2Z/C3 Shielded Ball Bearing 50mm x 80mm x 16mm

SKF 6010-2Z/C3 Shielded Ball Bearing 50mm x 80mm x 16mm

Our Price:  £19.01(Exc. 20% VAT)(£22.81 Inc. VAT)

Weight:  260 g



Available for prompt despatch.

Ashley Part Number:  6010ZZC3
Brand:  SKF
Inside Diameter (d):  50mm
Outside Diameter (D):  80mm
Width (B):  16mm
Clearance:  C3

SKF Deep Groove Ball Bearing 6010-2Z/C3 Metal Shielded

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.


d: 50mm
D: 80mm
B: 16mm
Dynamic Load: 22.9 kN
Static Load: 16 kN
Fatigue Load Limit: 0.71 kN
Reference Speed: 18000 rpm
Limiting Speed: 9000 rpm
d1: 59.8mm
D2: 72.8mm
r1,2 min: 1mm
da min: 54.6mm
Da max: 75.4mm
ra max: 1mm




Be the first to Write a Review for this item!