Image displayed shows the product type but may not be the exact item

SKF 6007-2RS1 Sealed Ball Bearing 35mm x 62mm x 14mm

Quantity Discounts: Applied at checkout

5+: £9.02      10+: £8.52      25+: £8.02      50+: £7.52

£10.02
(Exc. 20% VAT)
(£12.02 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number
60072RS-SKF
Brand
SKF
Inside Diameter (d):
35mm
Outside Diameter (D):
62mm
Width (B):
14mm
Weight
160 g
SKF
Description

SKF Deep Groove Ball Bearing 6007-2RS1 Rubber Sealed

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 35mm
D: 62mm
B: 14mm
Dynamic Load: 16.8 kN
Static Load: 10.2 kN
Fatigue Load Limit: 0.44 kN
Reference Speed: 24000 rpm
Limiting Speed: 7000 rpm
d1: 43.8mm
D2: 55.6mm
r1,2 min: 1mm
da min: 39.6mm
Da max: 57.4mm
ra max: 1mm

 

 

 

Customer Reviews (0)

Be the first to Write a Review for this item!