Image displayed shows the product type but may not be the exact item

SKF 6005-2Z Shielded Ball Bearing 25mm x 47mm x 12mm

Quantity Discounts: Applied at checkout

5+: £5.14      10+: £4.85      25+: £4.57      50+: £4.28

(Exc. 20% VAT)
(£6.85 Inc. VAT)
Available for prompt despatch.
Ashley Part Number
Inside Diameter (d):
Outside Diameter (D):
Width (B):
80 g

SKF Deep Groove Ball Bearing 6005-2Z Metal Shielded

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A shielded ball bearing has two metal shields, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing some protection from outside contaminants as well as protection from light mechanical damage. The metal shields also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 25mm
D: 47mm
B: 12mm
Dynamic Load: 11.9 kN
Static Load: 6.55 kN
Fatigue Load Limit: 0.275 kN
Reference Speed: 32000 rpm
Limiting Speed: 16000 rpm
d1: 32mm
D2: 42.2mm
r1,2 min: 0.6mm
da min: 28.2mm
Da max: 43.8mm
ra max: 0.6mm




Customer Reviews (0)

Be the first to Write a Review for this item!