SKF 6003-2RSH Sealed Ball Bearing 17mm x 35mm x 10mm

SKF 6003-2RSH Sealed Ball Bearing 17mm x 35mm x 10mm

Quantity Discounts: Applied at checkout

5+: £4.07      10+: £3.84      25+: £3.62      50+: £3.39

Our Price:  £4.52(Exc. 20% VAT)(£5.42 Inc. VAT)

Weight:  40 g



Available for prompt despatch.

Ashley Part Number:  60032RS
Brand:  SKF
Inside Diameter (d):  17mm
Outside Diameter (D):  35mm
Width (B):  10mm

SKF Deep Groove Ball Bearing 6003-2RSH Rubber Sealed

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 17mm
D: 35mm
B: 10mm
Dynamic Load: 6.37 kN
Static Load: 3.25 kN
Fatigue Load Limit: 0.137 kN
Reference Speed: 45000 rpm
Limiting Speed: 13000 rpm
d2: 20.7mm
D2: 31.4mm
r1,2 min: 0.3mm
da min: 19mm
Da max: 33mm
ra max: 0.3mm




Be the first to Write a Review for this item!