SKF 6000-2RSH/C3 Sealed Ball Bearing 10mm x 26mm x 8mm

SKF 6000-2RSH/C3 Sealed Ball Bearing 10mm x 26mm x 8mm

Our Price:  £4.87(Exc. 20% VAT)(£5.84 Inc. VAT)

Weight:  20 g



Available for prompt despatch.

Ashley Part Number:  60002RSC3
Brand:  SKF
Inside Diameter (d):  10mm
Outside Diameter (D):  26mm
Width (B):  8mm
Clearance:  C3

SKF Deep Groove Ball Bearing 6000-2RSH/C3 Rubber Sealed

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

d: 10mm
D: 26mm
B: 8mm
Dynamic Load: 4.75 kN
Static Load: 1.96 kN
Fatigue Load Limit: 0.083 kN
Reference Speed: 67000 rpm
Limiting Speed: 19000 rpm
d2: 12.55mm
D2: 22.6mm
r1,2 min: 0.3mm
da min: 12mm
Da max: 24mm
ra max: 0.3mm





Be the first to Write a Review for this item!