Image displayed shows the product type but may not be the exact item

SKF 61819-2RS1 Sealed Thin Section Ball Bearing 95mm x 120mm x 13mm

Quantity Discounts: Applied at checkout

5+: £132.75      10+: £125.77      25+: £118.78      50+: £111.79

£139.74
(Exc. 20% VAT)
(£167.69 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number
618192RS-SKF
Brand
SKF
Inside Diameter (d):
95mm
Outside Diameter (D):
120mm
Width (B):
13mm
Weight
310 g
SKF
Description

SKF Thin Section Ball Bearing 61819-2RS1 Rubber Sealed

Thin section ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable thin section ball bearings to accommodate axial loads in both directions.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offer the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
d: 95mm
D: 120mm
B: 13mm
Dynamic Load: 19.9 kN
Static Load: 22.8 kN
Fatigue Load Limit: 0.93 kN
Reference Speed: 11000 rpm
Limiting Speed: 3000 rpm
d2:  
D2: 114mm
r1,2 min: 1mm
da min: 99.6mm
Da max: 115mm
ra max: 1mm

 

 

 

 

Customer Reviews (0)

Be the first to Write a Review for this item!