Image displayed shows the product type but may not be the exact item

MJ5/8-2RS Imperial Sealed Ball Bearing (RMS5-2RS) 5/8 x 1-13/16 x 5/8

Quantity Discounts: Applied at checkout

5+: £7.78      10+: £6.91      25+: £6.26      50+: £5.62

£8.64
(Exc. 20% VAT)
(£10.37 Inc. VAT)
Available for prompt despatch.
+
Ashley Part Number
MJ5/82RS-BUD
Brand
Budget
Inside Diameter (d):
15.87mm / 0.625 Inch
Outside Diameter (D):
46.03mm / 1.812 Inch
Width (B):
15.87mm / 0.625 Inch
Weight
200 g
Description

Imperial Ball Bearing MJ5/8-2RS Rubber Sealed

Popular metric bearings, commonly known as pop met, single row deep groove ball bearings are one of the most common types of ball bearing in use, this is down to their versatility. They are simple in design, suitable for high speeds, non-separable, are very robust in operation and require very little maintenance. Deep raceway grooves and the close conformity between the grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, even at high speeds.

A sealed ball bearing has two rubber seals, one on each side of the ball bearing between the inner and outer races. This offers the ball bearing protection from outside contaminants. The rubber seals also retain the pre-filled grease within the ball bearing ensuring that it stays lubricated for life.

Technical Information
Inside Diameter (d): 15.87mm / 0.625 Inch Width (B): 15.87mm / 0.625 Inch
Outside Diameter (D): 46.03mm / 1.812 Inch  

 

Customer Reviews (0)

Be the first to Write a Review for this item!