power transmissions
Ashley Power
suppliers to industry
motors
taper roller

Taper Roller Bearings


Taper Roller Bearings

Ashley Power Limited can supply both metric and imperial sized taper roller bearings.

Taper roller bearings are produced by many bearing manufacturers in various designs and sizes to match many applications. The basic design of a taper roller bearing consists of two main components. The first is the inner ring commonly known as the cone with the rollers set at a slight angle. The second component is the outer ring known as the cup. Their design makes taper roller bearings particularly suitable for the accommodation of combined radial and axial loads and can be easily disassembled.

One important characteristic of these bearings is their ability to absorb slight angular misalignments between the inner and outer rings, due to the fact that the internal design of the contact between the rollers and the raceways have been modified.

Ashley Power Limited can also supply double row taper roller bearings.

Double row tapered roller bearings are pre-adjusted units normally formed by two inner units and a double outer ring. These bearings are usually greased and fitted with a set of seals which prevents the entrance of pollutants and the loss of grease. The arrangement of the inner units allows the bearing to withstand large axial and radial loads in two directions. Their axial capacity will depend on the angle of contact of the outer raceway.

Catalogues

All of our catalogues are available to download in PDF format. To view our catalogues see links to the main Bearings and Bushes catalogue and main Taper Roller Bearing sections below.

Full Catalogue

Bearings and Bushes

Taper Roller Bearing Catalogue Sections

Taper Roller Bearings - Single Row - Metric



 Nationwide
WiltshireDorset